Commercial : +33780912481 | Support : +33780916070 (Lun-Ven)

GPS Capturs Model C Bienenstöcke

79€ zzgl. MwSt.

+ Wahl Abonnement Capturs/Sigfox ab 2,29€ zzgl. MwSt/Monat

Oder zahlen Sie gebührenfrei in 4x mit

Capturs Model C Bienenstöcke GPS-Tracker
Capturs/Sigfox Abonnement – beliebige Dauer
Zugang zur Capturs Premium-Plattform/Anwendung und API
20 SMS

Capturs/Sigfox Abonnement – 1, 2 oder 3 Jahre
Konsultieren Sie die Sigfox-Abdeckungskarte
Unverbindlich.

Capturs Model C Bienenstöcke GPS-Tracker: 79€ zzgl. MwSt. pro Stück
Capturs/Sigfox Abonnement: ab 2,29€ zzgl. MwSt./Monat

Mengenrabatte: Kontaktieren Sie uns

GPS Capturs Model C Bienenstöcke

79€ zzgl. MwSt.

+ Wahl Abonnement Capturs/Sigfox ab 2,29€ zzgl. MwSt/Monat

Oder zahlen Sie gebührenfrei in 4x mit

Abonnement für 2,29€ zzgl. MwSt./Monat mit 3 Jahre Verpflichtung

Abonnement für 2,69€ zzgl. MwSt./Monat mit 2 Jahre Verpflichtung

Abonnement für 2,99€ zzgl. MwSt./Monat mit 1 Jahr Verpflichtung

Capturs Model C Bienenstöcke GPS-Tracker
Capturs/Sigfox Abonnement – beliebige Dauer
Zugang zur Capturs Premium-Plattform/Anwendung und API
20 SMS

Capturs/Sigfox Abonnement – 1, 2 oder 3 Jahre
Konsultieren Sie die Sigfox-Abdeckungskarte
Unverbindlich.

Capturs Model C Bienenstöcke GPS-Tracker: 79€ zzgl. MwSt. pro Stück
Capturs/Sigfox Abonnement: ab 2,29€ zzgl. MwSt./Monat

Mengenrabatte: Kontaktieren Sie uns

Contactez nous si vous souhaitez plus d'informations
Demander un devis personnalisé

Ein persönliches
Angebot anfordern

Fonctionne sous le réseau GSM

Inklusive 1-Jahres-Abonnement (Minimum): Erneuerung

Prix dégressifs selon les quantités

Mengenrabatte:
bitte angeben

Ein GPS-Tracker, der für 25-mm-Bienenstockrahmen geeignet ist.

Der GPS-Tracker lässt sich leicht installieren und in einem Rahmen verstecken. Er ist effektiv und nicht invasiv.

▶️ Verfolgung in Echtzeit
Live-Positionen werden mit der programmierten Frequenz gesendet. Die Grundeinstellung für das Model C Bienenstöcke GPS-Tracker ist 1 Position, die alle 15 Minuten gesendet wird (Flugbahngenauigkeit von ca. 1 Punkt alle 5 Minuten).
Eine globale Ansicht ermöglicht es Ihnen, den Standort aller Capturs GPS-Tracker gleichzeitig zu sehen (unabhängig vom Modell). Nutzen Sie die Vorteile einer detaillierten Ansicht jedes Ihrer Capturs-GPS-Tracker, die Ihnen Informationen sowie alle zugehörigen Trajektorien und Haltepunkte in Echtzeit auf der Capturs-Schnittstelle (mobile Anwendung oder Web-Plattform) liefert.
Die Positionen und Trajektorien können im GPX-Format von der Capturs-Plattform exportiert werden.


▶️ Sigfox-Netzwerk

Der GPS-Tracker Capturs Model C nutzt das Sigfox Ultra-Narrow-Band-Netzwerk für das Internet der Dinge. Wählen Sie beim Kauf die Anzahl der Jahre des erforderlichen Abonnements. Sehen Sie sich die Sigfox-Abdeckungskarte an.


▶️ Lebensdauer der Batterie

Die Batterielebensdauer des Capturs Model C Bienenstöcke GPS-Trackers variiert zwischen mehreren Monaten und mehreren Jahren, je nach Nutzung und der Anzahl der täglich gesendeten Positionen.

Verwenden Sie Lebensdauer der Batterie
1 Position / Tag 3,5 Jahre
In Bewegung 1h / Tag 1 Jahr
In Bewegung 6h / Tag 3 Monate


▶️ Batterie

Ersetzen Sie ganz einfach die CR123-Batterie, die Sie im Handel finden.


▶️ Wasserabdichtung

Der GPS-Tracker ist IP67-zertifiziert: kein Eindringen von Staub, vollständiger Schutz gegen Berührung (staubdicht). Kein Eindringen von Wasser, wenn er 30 Minuten lang bis zu einer Tiefe von 1 Meter untergetaucht wird.


▶️ SMS- und/oder E-Mail-Warnungen erstellen

Konfigurieren Sie verschiedene Arten von SMS-/E-Mail-Warnungen über die Capturs-Oberfläche: Zoneneintritt, Zonenaustritt, Bewegungserkennung, Immobilität, Abwesenheit, schwache Batterie, Temperatur. Sie können den Inhalt der Alarme ändern und die Empfänger Ihrer Wahl eingeben.


▶️ Kursverläufe und Positionen teilen

Generieren Sie selbst einzigartige URLs und teilen Sie diese mit beliebig vielen Personen. Ändern Sie Parameter und behalten Sie die Kontrolle: Aktivierung/Deaktivierung, Löschung, Dauer des gemeinsamen Pfads usw.


▶️ Erweiterte Analysen generieren

Erstellen Sie automatische Berichte zu allen Ereignissen auf Ihren Capturs GPS-Trackern: Positionen, Alarme, Zonen, Bewegungen, Stopps, Temperatur usw. Erstellen Sie benutzerdefinierte Dashboards und Diagramme. Exportieren Sie Daten im CSV-Format zur weiteren Verarbeitung.


▶️ Berichte über Zonenein- und -ausgänge

Erstellen Sie Ihre eigenen virtuellen Zonen mit unserem Tool zur Erstellung individueller Zonen. Zeigen Sie Ihre Zonen auf der Karte in verschiedenen Farben an. Verknüpfen Sie diese Zonen mit Warnmeldungen, um Nachrichten zu erhalten, wenn ein GPS-Tracker eine Zone betritt oder verlässt. Erstellen Sie automatische Berichte über das Betreten und Verlassen von Zonen und exportieren Sie diese zur Datenanalyse.

Länge 87mm | Breite 57mm | Dicke 24mm

Gewicht 60g

Stromversorgung – austauschbare, nicht wiederaufladbare CR123-Lithiumbatterie.

Sigfox-Netzwerk

1 Position / 15min bei Bewegung – 1 Position / Tag bei Stillstand

Siehe technisches Blatt.

Verfolgt die Bienenstöcke im Falle eines Diebstahls.

Kann auch auf die gleiche Weise wie das Standardmodell C verwendet werden.

Die Capturs-Plattform: einfach und leistungsstark

Greifen Sie von Ihrem Computer, Tablet oder Smartphone aus auf die Connect-Schnittstelle oder die mobile Capturs-Anwendung zu.

Erfahren Sie mehr über die Echtzeit-Tracking-Plattform Capturs und alle damit verbundenen Funktionen.

Greifen Sie über Ihr Smartphone (App verfügbar für Android und IoS), Tablet oder Computer auf die Capturs-Plattform zu.

Verwalten Sie alle Ihre GPS-Tracker in Echtzeit, stellen Sie Alarme ein, erstellen Sie unendlich viele benutzerdefinierte Zonen und generieren Sie Berichte für eine gründliche und detaillierte Analyse.

Frequently asked questions.

Um mehr über den Capturs Model C Bienenstöcke GPS-Tracker zu erfahren, kontaktieren Sie uns oder konsultieren Sie die FAQ.

Model C Capturs tracker

Degressive prices: how to order several trackers?

If you wish to order several trackers and benefit from volume discount prices, contact us or ask for a quotation.

How do I associate my GPS tracker to my Capturs Account?
1 – On Connect or the Capturs application, open the left menu and click on My Devices.


2 – Click on the button + to access to the addition of the new device.


3 – Complete the serial number (S/N) and the activation key (Key) indicated on the back of the device.
(It is normal that the first letter (A or B) of the S/N does not then appear in the device name because it is the device’s model indicator.)


or


Click on the QR code icon and scan the back of the device.

Why does the interface say “device already registered”?

Capturs GPS trackers can only be registered to one user account. If you try to add them to a second account, this message will appear. You will need to delete it from the old account before you can register it to a new one.

How do I change the name and image of my GPS tracker?
1 – On the Capturs interface, open the left menu and click on My Devices. You can see the information of your trackers (device and/or smartphone).


2 – To change the name of your GPS tracker, click on the icon on the right side of your screen, in the insert corresponding to your GPS tracker.


3 – To change the picture of your GPS tracker, click on the icon on the left side of your screen, in the insert corresponding to your GPS tracker. You can then upload the photo of your choice, within a limit of 2Mo, with the icon .
How do I send an alert?

In order to send an alert, you have to create one and configure it.
Enter the email addresses and/or phone numbers of your relatives in the configuration of your alert.
To send an alert, you must be in an area covered by the Sigfox network or by GSM (depending on the model).

How to create and configure an alert?
1 – On the Capturs interface, open the left menu and click on My Alerts.


2 – Choose the GPS tracker you want to configure.


3 – To create a new alert, click on . Choose the type of alert in the scroll bar that appears.


4 – Click on the icon   to set up your alert.


Possible configurations:
– Add a name to the alert.
– Enable automatic reactivation of the alert.
– Create time slots for triggering alerts.
– Choose the type of sending of the alert (SMS, Email, API Callback)


Alert content:
– Add one or more Emails, phone numbers, etc..
– Customize the subject and content of the alert as you wish.
– Check the “Share link activated” case if you want to share your tracking link in the alert.


For area alerts:
– Customize the zones by pressing the dots around the red zone.
– Create round or polygonal areas.
– Capturs Systems Connect specific: select an area already registered in the library.

If it’s a click button alert :
Just click on the button in the middle of the GPS tracker according to the chosen alert (1 click, 2 clicks, 4 clicks or a long click). The blue led at the bottom left of the GPS tracker will blink as many times as you clicked on the button.


If it is the 3 clicks alert :
In the case of the 3-click alert, there is an acknowledgement function: after pressing the button 3 times, the “red” and “green” leds will start flashing alternately until the acknowledgement is received, where the green led will flash rapidly. If this is not the case, the red led will blink quickly and the GPS tracker will try to send the alert again 10 minutes later and start blinking alternately until validation or not of the data reception.


If it is a area alert:
Your alert is sent automatically when your GPS tracker (device or smartphone) enters or leaves the area you have configured.


If it is a motion alert:
When your device is stationary and hasn’t moved for a while, your motion alert will be triggered when the tracker’s motion is detected.


If it is a no motion alert:
An alert will be sent when the GPS tracker has been stationary for a set time.


If it is a low battery alert:
An alert will be sent when the battery is less than 20% of its capacity.


If it is a power-off alert:
An alert will be sent when the GPS tracker is turned off, i.e. when someone turns it off.

If it is an unplugging alert:
An alert will be sent when the GPS tracker is unplungged.


If it is an absence alert:
An alert will be sent when the GPS tracker is not present in a predefined area at the scheduled time.


If it is a temperature alert:
An alert will be sent when the temperature is below or above a certain set temperature threshold.

How do I start a live tracking using my Capturs GPS tracker?

To start a live tracking using your Capturs GSP tracker, you need to have it registered on your Capturs account and to have an active subscription for real-time data transmission.

How do I associate my GPS tracker to my Capturs Account?
1 – On Connect or the Capturs application, open the left menu and click on My Devices.


2 – Click on the button + to access to the addition of the new device.


3 – Complete the serial number (S/N) and the activation key (Key) indicated on the back of the device.
(It is normal that the first letter (A or B) of the S/N does not then appear in the device name because it is the device’s model indicator.)


or


Click on the QR code icon and scan the back of the device.

Why does the interface say “device already registered”?

Capturs GPS trackers can only be registered to one user account. If you try to add them to a second account, this message will appear. You will need to delete it from the old account before you can register it to a new one.

Then simply take it with you or fix/place it. The device must be on and with battery to send its position when it is in motion.

The Capturs OBD GPS Tracker must be connected to the vehicle’s OBD II socket and the Capturs Power GPS Tracker must be connected to the vehicle battery.

Why isn’t my GPS tracker sending a position?

If the GPS trackers are transmitting well but no positions are being sent at the same time, this may be due to several phenomena specific to devices using satellite positioning systems.

The main losses of positions come from the signals dropping out between the GPS tracker and the satellites, thus preventing the triangulation of the position:

– From GPS fix just after departure, cold, where the GPS plotter could not see the constellation of satellites, and therefore needed about 3 minutes before starting to move to find the position and thus start to fix its position correctly.

– The outdoor environment: trees, buildings and even clouds can prevent the proper reception of data from a satellite and may cause triangulation to be prevented or accuracy to be lost.

How do I start my tracker?
1 – Unscrew the 4 screws until you can remove the tab.


2 – Gently remove the tab.


3 – Tighten the 4 screws without tightening too much.


4 – Associate your GPS tracker to your Capturs account.
How do I associate my GPS tracker to my Capturs Account?
1 – On Connect or the Capturs application, open the left menu and click on My Devices.


2 – Click on the button + to access to the addition of the new device.


3 – Complete the serial number (S/N) and the activation key (Key) indicated on the back of the device.
(It is normal that the first letter (A or B) of the S/N does not then appear in the device name because it is the device’s model indicator.)


or


Click on the QR code icon and scan the back of the device.

Why does the interface say “device already registered”?

Capturs GPS trackers can only be registered to one user account. If you try to add them to a second account, this message will appear. You will need to delete it from the old account before you can register it to a new one.

How do I turn my GPS tracker on/off?
Before starting your GPS tracker, consult the quick start guide.


GPS Tracker Model B:
A simple press on the central button of the tracker allows it to be switched on, if there is enough battery, and to start sending positions in real time.
To turn off the tracker, you must keep the button pressed for about 5 seconds. The leds of the tracker will have the following behaviour: after 3 seconds the blue led will light up, then by keeping pressed, the red led will light up about 2 seconds later. You can release the button when the tracker is off.


GPS Tracker Model C/C Beehive:
If the battery is inserted, the GPS tracker starts automatically. If a tab is fitted to the GPS tracker, gently pull it out and gently tighten the 4 screws (standard Model C) to close the case properly.
To turn off the GPS tracker, remove the battery.


GPS Tracker OBD:
To turn the GPS tracker on and off, simply plug and unplug it from the vehicle’s OBD II socket.


GPS Tracker Power:
To turn the GPS tracker on and off, simply plug and unplug it from the vehicle’s battery.


GPS Tracker Performance GSM:
To switch the GPS tracker on and off, simply press and hold the button on the edge for about 5 seconds.


GPS Tracker Endurance GSM/Mini:
To switch the GPS tracker on and off, open the case and press the ON/OFF switch located inside.
How long does the GPS trackers battery last?

Battery life varies according to the use and stops of the Capturs GPS trackers. It can also vary according to the configurations made by our teams or by yourself on the Capturs software (only available for the Model B or Model A). It can be up to several months/years.

The battery life of the Capturs OBD and POWER GPS trackers is unlimited as it is linked to that of the vehicle.

GPS tracker model Estimated battery life
Model B
Performance GSM
Model C
Model C Beehive
Endurance GSM
Mini
OBD
Power

Estimated battery life by model :

Model B
Performance GSM
★★★★☆

Model C
Model C Beehive
Endurance GSM
Mini
★★★★★

OBD
Power

How much does my tracker weigh and measure?
Model B 68 x 42 x 24 mm 55g
Model C 75 x 75 x 35 mm 60g
Model C Beehive 87 x 57 x 24 mm 60g
Performance GSM 39 x 26 x 77 mm 93g
Endurance GSM 85 x 49 x 30 mm 140g
Mini 64 x 50 x 22 mm 82g
OBD 48 x 48 x 22 mm 58g
Power 135 x 65 x 15 mm 130g

 

Model B GPS tracker: Measures 68x42x24mm and weighs 55g.

Model C GPS tracker: Measures 75x75x35mm and weighs 60g.

Model C Beehive GPS tracker: Measures 87x57x24mm and weighs 60g.

Performance GSM GPS tracker: Measures 39x26x77mm and weighs 93g.

Endurance GSM GPS tracker: Measures 85x49x30mm and weighs 140g.

Mini GPS tracker: Measures 64x50x22mm and weighs 82g.

OBD GPS tracker: Measures 48x48x22mm and weighs 58g.

Power GPS tracker: Measures 135x65x15mm and weighs 130g.

How to change battery and know the percentage of battery remaining?
The Capturs Model C tracker is not rechargeable. Once the tracker has no more battery, you must change the battery inside. It is a lithium battery CR123, available in supermarkets.


Install or change the battery
1 – Make sure you are in good condition to perform battery change (not
exceeding temperature usage range, no water on the case, the battery
or the operator’s hands.
2 – Remove the 4 screws using a proper screwdriver.
3 – If already inserted remove the old battery and recycle in accordance
with the applicable recycling instructions in force in your country.
4 – Insert the new battery by strictly respecting polarity plus and minus (+/-)
as written on the battery and on the sticker. The “+” pole of the battery
must go to the “+” side of the battery holder.
5 – Close the casing by tightening the four screws.


To find out the percentage of battery in your tracker, log on to the web platform or application.


In “My Devices”:
In the left menu, “Devices” then “My Devices”, you can see the information of your device and its battery percentage.


On the map:
Select the device for which you want to know the information in the top blue box.
Click on the icon at the bottom right of your screen and the information will appear with the percentage of your battery.


“Low battery” alert:
Create a low battery alert. The alert will be triggered when the battery is at less than 20% of its capacity and you will receive an SMS or email, depending on the configuration of your alert.
How to fix my tracker?

It is possible to mount and fix the Capturs Model C GPS tracker. The GPS tracker has 2 holes protected by a small cover. Open the cover and use the holes to fix the GPS tracker to the desired support with screws or bolts.
Other fixing systems are possible: double-face adhesive tape, magnets, horse clamp, etc.

Is my GPS tracker waterproof?

The Model B (and A) Capturs GPS tracker is not waterproof and has no IP certification, but we provide with each GPS tracker a waterproof pouch that allows the GPS tracker to be sheltered from water.

The Model C Capturs, Endurance GSM, Mini and Power GPS trackers are certified IP67. They are waterproof, dustproof and weather resistant.

Please note that the Model C Beehive GPS tracker is not waterproof, unlike the standard Model C.

The GPS tracker Capturs Performance GSM is IPX5 certified. It is protected against water splashes from all directions.

What is the frequency of messages sent by my GPS tracker?
Model B Live geolocation: 10 min / Tracking accuracy: 3 min (1)
Model C / C Beehive Live geolocation: 15 min / Tracking accuracy: 5 min
Performance GSM Live geolocation: 60 s / Tracking accuracy: 60 s (2)
Endurance GSM Live geolocation: 2 positions/day / Tracking accuracy: 2 positions/day (2)
Mini Live geolocation: 2 positions/day / Tracking accuracy: 2 positions/day (2)
OBD Live geolocation: 30 s / Tracking accuracy: 30 s
Power Live geolocation: 30 s / Tracking accuracy: 30 s
(1) It is possible to increase this frequency in the PC/Mac Capturs software by connecting your Model B GPS tracker to your computer.



(2) It is possible to change this frequency through our support team. Please note that the higher the frequency, the less time the battery will last.

Model B:
Live geolocation: 10min / Tracking accuracy: 3min (1)

Model C / C Beehive:
Live geolocation: 15min / Tracking accuracy: 5min

Performance GSM:
Live geolocation: 60s / Tracking accuracy: 60s (2)

Endurance GSM:
Live geolocation: 2 positions/day / Tracking accuracy: 2 positions/day (2)

Mini:
Live geolocation: 2 positions/day / Tracking accuracy: 2 positions/day (2)

OBD:
Live geolocation: 30s / Tracking accuracy: 30s

Power:
Live geolocation: 30s / Tracking accuracy: 30s

(1) It is possible to increase this frequency in the PC/Mac Capturs software by connecting your Model B GPS tracker to your computer.

(2) It is possible to change this frequency through our support team. Please note that the higher the frequency, the less time the battery will last.

What type of battery is used for the tracker?

The Capturs Model C GPS tracker uses a CR123 non-rechargeable lithium battery.

How to change battery and know the percentage of battery remaining?
The Capturs Model C tracker is not rechargeable. Once the tracker has no more battery, you must change the battery inside. It is a lithium battery CR123, available in supermarkets.


Install or change the battery
1 – Make sure you are in good condition to perform battery change (not
exceeding temperature usage range, no water on the case, the battery
or the operator’s hands.
2 – Remove the 4 screws using a proper screwdriver.
3 – If already inserted remove the old battery and recycle in accordance
with the applicable recycling instructions in force in your country.
4 – Insert the new battery by strictly respecting polarity plus and minus (+/-)
as written on the battery and on the sticker. The “+” pole of the battery
must go to the “+” side of the battery holder.
5 – Close the casing by tightening the four screws.


To find out the percentage of battery in your tracker, log on to the web platform or application.


In “My Devices”:
In the left menu, “Devices” then “My Devices”, you can see the information of your device and its battery percentage.


On the map:
Select the device for which you want to know the information in the top blue box.
Click on the icon at the bottom right of your screen and the information will appear with the percentage of your battery.


“Low battery” alert:
Create a low battery alert. The alert will be triggered when the battery is at less than 20% of its capacity and you will receive an SMS or email, depending on the configuration of your alert.
What types of alerts can I send?
You can send different types of alerts depending on your tracker.


Model B (or A) GPS tracker: Area entry, area exit, motion detection, no motion, powering-Off, absence, 3 press button, 1 press button, 2 press button, 4 press button, 1 long press button and low battery.


Model C GPS tracker: Area entry, area exit, motion detection, no motion, absence, low battery.


Performance GSM, Endurance GSM, Mini GSM GPS trackers: Area entry, area exit, motion detection, no motion, absence, low battery.


OBD GSM, Power GSM GPS trackers: Area entry, area exit, motion detection, no motion, absence, unpluging.


Smartphone tracker via Capturs application: Area entry, area exit, motion detection, no motion.

Capturs Systems Connect interface specific functions

How do I access the Capturs Systems Connect platform?
The Capturs Systems Connect platform is available via this URL: https://connect.capturs-systems.com/.
How do I use the “Analytics” feature?
The Analytics function allows you to have advanced analysis on the activity and events of your Capturs GPS trackers. These analyses are designed with Google Data Studio using data from your GPS trackers and previously created zones. They are represented in the form of various tables and graphs.


How do I access it?


1 – On the Capturs interface, open the left menu and click on Analytics.


2 – Go to the advanced analyses: select date, zone and tracker. Scroll through the different tables and graphs by clicking on < > at the bottom of the page. Click on Google Data Studio at the bottom of this page for additional analyses.


You don’t have access to this feature? Contact support@capturs.com.
How do the zones work?
1 – On the Capturs interface, open the left menu and click on Areas.


2 – Click on the button + to access to the addition of the new area.


3 – Create a specific area by moving the points that surround it, give it a name, a color and validate. Create all the areas you need this way.


4 – All the areas you created are now on the map at the top of this same page. They are also saved in the library of your account in order to reuse them by creating area alerts.


5 – The check in / check out table is at the bottom of the same page. It allows you to have precise data on the trackers that have entered or left these areas, as well as the times and dates.
How to understand, use and customize the raw data table?
1 – On the Capturs interface, open the left menu and click on Raw data.


2 – Select a tracker in the search bar to bring up the table.


3 – Click on to choose the columns you are interested in. The columns are : Date, type, Sigfox sequence, event sequence, is moving, temperature, battery charge, GPS latitude, GPS longitude, GPS position, GPS altitude, GPS speed, GPS accuracy, software version, time stamp and tracker ID.


4 – You can now analyze the table and graphs that correspond to the raw data emitted by your tracker. These are doubts the data sent by the tracker to each event received by the tracker.
What are the points of interest?

Points of Interest (POIs) are your own landmarks. You can easily create them by entering a street address or by pointing to the map. They will be displayed on the map if you select the “points of interest” icon on the right side of the screen. Also, easily find your points of interest on the map by filtering them using the top bar that appears when you have saved POIs.
With the “Labels” tool, customize your points of interest even better by categorizing them with colors.

What does the trajectory from the network triangulation correspond to?

When you click on on the map, a pink trajectory appears. It corresponds to the trajectory according to the atlas points, calculated by the Sigfox network and according to the signal levels received for the last message. This trajectory can be useful to see the position of a tracker when no position has been received.

What reports do I have access to?
1 – On the Capturs interface, open the left menu and click on Reports.


2 – You have access to the following reports: alerts, check-in/out, raw data, stop points and analytics.


3 – You can export the data by clicking on CSV EXPORT.

Das Sigfox LPWAN-Netzwerk.

Das Sigfox-Netzwerk ist ein drahtloses Netzwerk mit geringem Stromverbrauch und großer Reichweite. Siehe die Karte der Sigfox-Netzwerkabdeckung.

Traceurs GPS Capturs dans la ville de Paris

Länder, die im Sigfox-Abonnement enthalten sind: Belgien, Bulgarien, Dänemark, Deutschland, Estland, Finnland, Frankreich, Griechenland, Irland, Italien, Kroatien, Lettland, Liechtenstein, Litauen, Luxemburg, Malta, Niederlande, Österreich, Polen, Portugal, Rumänien, Schweden, Schweiz, Spanien, Vereinigtes Königreich, Serbien, Slowakei, Slowenien, Tschechische Republik, Ungarn, Französisch-Guayana, Französisch-Polynesien, Guadeloupe, Martinique, Mayotte, Neukaledonien, Reunion, Südafrika, Botswana, Kenia, Mauritius, Nigeria, Oman, Senegal, Swasiland, Vereinigte Arabische Emirate.